Copertina Straight Height-Adjustable Executive Desk
Price range: $1,349.00 through $1,888.00
Plus tax for local pickup and shipping in Texas
Have a question about this product?
Email us
"*" indicates required fields
Why anyone bothers hiding the legs
Tidy. Neat. Clean. Finished. Thoughtful. Refreshing. Peaceful. Organized. Restful.
Those are the words people reach for when they walk into a clean room with the closet doors closed. Notice that not one of them is about the closet. They are about how the room feels once the clutter is behind a door.
That is the only reason closets have doors at all. Clothes on an open rail work perfectly well. They just cost you every word in that list.
A standing desk has the same problem at knee height: columns, brackets, a control box, a loom of cable, all of it in the part of the room your visitor is looking at while they talk to you.
Anyone can stand at a cheap sit-stand desk. This one lets you stand restfully.
Copertina is Italian for cover — as in the cover of a book. That is not a flourish on the name. Stand one leg on its end before it is assembled and you are looking at a closed book: an outer cover panel, an inner one behind it, and the lift column standing between them where the pages would be. Corp Design's own catalogue says as much — the piece behind the face is listed as the inner core panel of the Copertina leg cover.
They name the whole range that way. Altezza is height, Elevare is to raise, Veloce is fast. Somebody in Milan was paying attention.
How it does it
The Copertina puts the lift columns inside laminate covers — Corp Design's "Copertina Leg Cover Solutions," which is a plain name for a good trick. Lowered, you are looking at a conventional executive desk: a solid run of woodgrain, a modesty panel, clean lines to the floor, no visible hardware.
Then somebody touches the keypad and it turns out to have been a standing desk the whole time.
And here is the detail that makes it work: the covers don't move. They stand 26¼ inches tall and stay there. The worksurface travels away from them. So at sitting height the desk is a solid object, and at standing height you can see daylight underneath — which is the moment people notice what it is.
What's actually under there
A Corp Design Elevare two-stage straight frame. Steel, dual motor, and it lifts 220 pounds — which is monitors, arms, a docking station and whatever else accumulates, with room to spare.
It travels from 28.3 to 47.5 inches plus the thickness of the top, at about an inch a second. The keypad holds four programmable positions, so sitting and standing are one button each rather than a hunt. There is an anti-collision cut-out, which matters more than it sounds in a room with a credenza behind you.
The leg covers are reversible and non-handed, so the same desk suits a left-handed room or a right-handed one. Nothing has to be ordered a particular way round.
Room for your knees
The modesty panel spans the gap between the two leg covers, so its width is the clear space you actually get:
- 72-inch desk — about 58½ inches of clear knee well
- 66-inch desk — about 53¾ inches
- 60-inch desk — about 46¾ inches
Fitness starts at the office and finishes at the gym
Whatever you do at six o'clock, you spend more of your waking life at this desk than anywhere else you go.
A desk that moves only helps if it actually gets moved — and that comes down to whether standing costs you anything. One button and a room that still looks right afterwards, and it goes up most days. A desk that announces itself, or trails a loop of cable, or has to be tidied first, quietly stops moving after a fortnight.
See it move
Thirty seconds on our showroom floor, no narration. Watch the worksurface travel away from the leg covers while the covers stay exactly where they are. That is the whole trick, and it is hard to photograph.
Where the cables go
Corp Design ships these tops undrilled, so as it arrives the cords run over the back edge of the surface and into the leg cover, where a small polished aluminium grommet near the top takes them inside. It has a swing-hinged door, so it closes back around whatever is passing through and the face of the cover still reads as solid. The cords run down inside and come out at a second grommet near the floor. Nothing is cable-tied to a bare column. The cord that runs from the desk to your wall socket is still a cord — no desk solves that one — but everything between the worksurface and the floor is inside the leg.
And the good part only shows when it moves. As the top rises, the little door swings open by itself to let the cord pay out, then settles back as the desk comes down. The cable manages its own slack. Nobody leaves a service loop, nobody clips a plastic spine to the underside, and nothing tugs on the back of your monitor at standing height.
It is a small hinge doing a job most desks solve with a bag of zip ties.
If you would rather have a grommet in the surface itself, our installers drill one while they are putting it together. That is five minutes for somebody standing in your office, and not an option at all for a desk that arrives on a pallet.
The privacy screen, and what it does at standing height
It is an extra, and several of our photographs have one fitted. That is the panel you can see hanging from the underside of the worksurface — it was specified on an installation we photographed, and it is not part of the desk unless you choose it above.
Pick it from the Privacy screen menu and we size it to your top. A 60″ desk takes the 40″ screen, a 66″ takes the 48″, a 72″ takes the 58″. You never have to work that out — choosing a width chooses the screen that fits it.
Both hang from the worksurface, not from the leg covers, so both travel up with the desk. And both are mounted in their own plane, set slightly proud of the fixed panel below — the two slide past each other as the desk moves, like two lifts in neighbouring shafts. Nothing collides at the bottom of the travel.
Which is why, sitting down, you are completely covered. At seated height the screen overlaps the fixed panel behind it and there is no gap at all.
⚠ The gap is something that opens as you rise. As the top goes up the screen goes with it, the overlap shrinks, and eventually a band appears between the bottom of the screen and the top of the fixed panel. The taller screen closes more of it for longer. Neither closes it completely at full height, and you can see that in our photographs because we would rather you noticed it here than on the morning it arrives.
Whether it matters depends on what is behind you. Against a wall, nobody will ever look. Facing into an open room, it is worth seeing before you decide.
And both ride on the lift, which is the part people forget. The column is rated to raise 220 lbs, and that budget is shared with everything else on the desk — two monitors on an arm, a docking station, a laptop, a printer somebody put there once and never moved. The screen is not free weight. A sheet of acrylic weighs roughly half what the same sheet of glass does, and the laminate screen is shorter again and lighter still. If your desktop is going to carry real equipment, choose with that in mind rather than on looks alone.
The six laminates
Corp Design’s own finish samples. The same six are available on the top, the leg covers and the modesty panel — and every one costs the same, so pick the one that suits the room rather than the budget.
Blanco Blanc de Gris Grigio Miele Noce Espresso
If precise color match is critical, please request an actual laminate finish sample. Photographs don’t always render precisely and are heavily influenced by individual monitor calibrations. We keep the finish chain on the showroom wall and we will post you a chip.

Blanco

Blanc de Gris

Grigio

Miele


Choose well
Six laminates — Blanco, Blanc de Gris, Grigio, Miele, Noce and Espresso — on the top, the leg covers and, if you want it, the modesty panel.
The frame comes in black, grey or white. Most people take white against a light laminate and black against a dark one, but it is genuinely a choice and it is the one thing on the desk that shows when it's raised.
The modesty panel is either matching laminate or pure white glass — a back-painted panel, so it reads as a clean white face rather than a sheet of woodgrain. In a small office it lightens the whole desk.
What we stock
We stock and install the 30-inch depth.
The frame is built for 24- and 30-inch worksurfaces. If you need something different, ring us and we will tell you honestly whether it is a good idea, which is a conversation rather than a web page.
Make it last
Nine times out of ten, residential-grade furniture will not survive its first commercial move. This is not residential-grade furniture.
The board runs 0.6 to 0.7 g/cm³ — commercial density, not the honeycomb fill under a flat-pack desk — and it is CARB Phase II and TSCA Title VI compliant for formaldehyde emissions. Corp Design warranties the non-moving parts for life and the moving parts, lift mechanism included, for ten years.
Thermally-fused or high-pressure? Pick your weakness.
This desk is thermally-fused laminate, and the honest way to explain that is to tell you how both kinds fail.
High-pressure laminate is a separate sheet bonded onto the core. It takes a knock well. Its inherent weakness is that it can peel, because there is a glue line waiting to let go.
Thermally-fused laminate is fused to the board itself. There is no layer to lift, so it will not peel — ever. Its inherent weakness is that something heavy landing on it can leave a divot.
Neither is the upgrade. They fail differently, and the trick is choosing the failure you can live with in your own room. An office of laptops and coffee cups will never divot a desk, and TFL will still look like that in fifteen years. A shop where somebody sets a twenty-five pound carburettor down while they think about it wants HPL's impact strength, and can take its chances on peeling.
You would not take the kids to school in a Corvette, and you would not race a minivan. Picking your weakness on purpose is most of the job.
If your room is the carburettor kind, tell us when you call and we will spec you the other thing.
Buy less. Choose well. Make it last.
This is the straight desk. The same Copertina leg covers and Elevare frame also build an L-shape, a U-shape and an L-shape workstation. Tell us the room and we will spec the one that fits it.
Delivery and installation
Quoted for your address, because that is the only honest way to do it. See how we deliver and install, or send us the room and we will come back with a number. We deliver and install throughout Central Texas, and we have installed in about twenty-five states for customers who asked us to.
Call and we will tell you what it costs to your door, what's on the floor today, and roughly when it would land.
512-452-3375
Additional information
| Width | 60", 66", 72" |
|---|---|
| Modesty panel | Matching laminate, Pure white glass |
| Laminate finish | Blanco, Blanc de Gris, Grigio, Miele, Noce, Espresso |
| Frame finish | White, Black, Grey |
| Depth | 30" |
| Height range | 28.3" – 47.5" plus worksurface |
| Lift capacity | 220 lbs |
| Privacy screen (upper modesty panel) | None, Laminate, Acrylic |






























